Add to Cart
8dBi High Gain Antenna 400~480MHz Mantenna Antenna For Outdoor Wireless Transmission
Specifications:
| Frequency Range | 868 |
| Bandwidth | 80MHz |
|
Gain-dBi |
8dBi |
| Beamwidth | 55° |
| F/B ratio-dB |
≥15 |
| VSWR | ≤1.4 |
| Polarization | Vertical |
| Max Power | 100W |
| Nominal Impedance | 50Ω |
| Connector | N (optional) |
| Length | 120cm |
| Weight |
225×225×35 |
| Work Temperature | -30°~ 60° |
| Connector | SMA Female or Customization |
Antenna Erection
1 Fix the wave director and the oscillator in a counterpoint ( please take notice that the drain hole of oscillator should be downward).
2 Erect the antennas to the pole with clamp according to polarization required.
3 Connect the RF cables well, and wrap up the connector with waterproof adhesive tape, and do not let the cable flutter in the wind.
4 Make a shield for protection the water back into the home before RF cables were acrossed indoor.